89647
Get Daily General Knowledge Questions and Answers Feedback and ads: @askme_feedbackbot
Why are moiré patterns important for materials science?
The so-called moiré patterns are motifs that emerge when two repetitive structures are overlaid.
This phenomenon is well known from computer or TV screens: when looking at a finely striped pattern, e.g. on a shirt, the stripes do not look evenly spaced and seem to bend in some areas. While undesirable in this case, the moiré effect can indeed be surprisingly useful.
Two atomically thin materials can be overlapped to create a new material, in which the atomic structures of the two produce a moiré pattern.
Some of these moiré materials exhibit astonishing properties, drastically different from those of their components, which may be applied in science, e.g. in novel nano-electronic devices.
The term originates from a French word moiré, a type of textile, traditionally made of silk but now also made of cotton or synthetic fiber, with a rippled or "watered" appearance, by pressing two layers of the textile when wet.
Subscribe- t.me/askmenow
How many people live in cities today?
🏙 Today, about 4.6 billion or 57% of the more than 8 billion people worldwide live in urban areas, according to different sources.
🌇 By 2050 this proportion is expected to increase to 68%, adding another 2.5 billion people to urban areas.
🏙 Today, the most urbanized regions include Northern America (with 82% of its population living in urban areas in 2018), Latin America and the Caribbean (81%), Europe (74%) and Oceania (68%).
🌇 A UN report notes that future increases in the size of the world’s urban population are expected to be highly concentrated in just a few countries. Together, India, China and Nigeria will account for 35% of the projected growth of the world’s urban population between 2018 and 2050, adding respectively 416, 255 and 189 million urban dwellers.
🏙 At present there are 3️⃣4️⃣ cities worldwide with more than 10 million inhabitants.
🎉⬆️ World Cities Day, designated by the UN, is celebrated annually on 31 October.
Subscribe- t.me/askmenow
Do migratory birds save energy escaping winter?
✔️ Scientists have long surmised that birds migrate during winters to save energy: far away from the biting cold, birds would need to expend less energy to keep themselves warm.
✔️ A new study has shown that migratory lifestyle carries no added overall energy cost.
✔️ Scientists have found partially migratory Eurasian blackbirds (Turdus merula) ⬆️ migrating to warmer regions in winter didn’t save more energy compared to members of the same species that stayed behind.
✔️ To measure the birds’ heart rate and body temperature over the course of the winter, researchers used surgically implanted biologgers.
✔️ It was also found that migrating birds started saving energy for migration by lowering their heart rate and body temperature almost a month before their departure.
✔️ The research raises important questions on why birds migrate if there’s no energy benefit, and where the unaccounted energy is being used instead.
Subscribe- t.me/askmenow
What are some examples of the largest 3D-printed objects?
🛳 The largest 3D printed boat is 11.980 m and was achieved by Abu Dhabi Maritime and Al Seer Marine (both UAE), in Abu Dhabi, UAE, on 6 Nov 2023 ⬆️.
⬛️ The largest 3D-printed structure (volume) is a wall with an outer shell and an inner filling that consists of 11.07 m³ of 3D-printed material and was achieved by Dubai Municipality (UAE), in Dubai, on 16 Oct 2019.
⚙️ The largest functional object to be 3D-printed in metal is a key jet engine component called a turbofan, measuring 1.5 m in diameter, printed in sections by Rolls-Royce and tested in July 2014.
🏠 The largest 3D printed villa is 303.42868 sq m (3266.079 sq ft) and was achieved by 3DXB Group, Dubai Municipality and Mohammed Bin Rashid Housing Establishment (all UAE) in Dubai, UAE, on 7 Dec 2023.
🏳️ The largest 3D-printed flag measures 16.2688 m² (175 ft² 11 in²), and was achieved by Anmar Gabra (KSA) in Makkah, Kingdom of Saudi Arabia, on 18 Aug 2024.
Subscribe- t.me/askmenow
What are the largest galaxy-made structures in the Universe?
ℹ️ Astrophysical jets are collimated streams of magnetized plasma produced by compact accreting objects, e.g. neutron stars or black holes.
When sustained for megayears (such long-lived coherence being yet unknown), these jets from supermassive black (SMBHs) holes become the largest galaxy-made structures in the Universe.
Named Porphyrion, after the king of giants in Greek mythology, the jets:
🌌stretch for around 23 million light-years – as long as 140 Milky Way galaxies
🌠are born at the heart of a galaxy located around 7.5 billion light-years away and are seen as they were when the 13.8 billion-year-old universe was just 6.3 billion years old
🔥put out trillions of times more energy per second than our sun does.
🌐 In terrestrial dimensions, this SMBH would have the size of 0.2 millimeters and the jets – the size of the Earth: an amoeba that generates a powerful fountain of energy the size of the entire planet!
Subscribe- t.me/askmenow
How many main types of batteries are there?
There are 2️⃣ main types of batteries:
🔋 Primary batteries, also known as non-rechargeable batteries, are designed and manufactured in the charged state for single use. Once their energy is depleted, they need to be replaced. Notable examples are alkaline batteries and lithium metal batteries.
🔋 Secondary batteries, also known as rechargeable batteries or accumulators, can be recharged after being discharged by reversing the flow of current through the battery and are usually assembled in the discharged state. They can be reused until the end of their useful life and their materials can be recycled. Secondary batteries are therefore more environmentally friendly and cost-effective than primary batteries. Examples are nickel–metal hydride (NiMH) batteries, lead–acid batteries, Li–ion batteries and solid-state batteries.
ℹ️✍️ Any device that can transform its chemical energy into electrical energy can be called a battery.
Subscribe- t.me/askmenow
Who invented the battery?
In 1800, Allesandro Volta, Italian physicist and chemist (1745-1827) made and introduced the first successful demonstration of a modern battery, commonly referred to as the Voltaic pile.⬆️
This device consisted of a series of zinc and silver plates stacked together, with each plate separated by a cloth soaked in a solution of acid and salt.
This invention paved the way for revolutionary advancements in long-distance communication, including the development of telegraphs in the late 1830s and the telephone in the 1870s.
However, the original Voltaic pile encountered a challenge due to the development of hydrogen bubbles as a result of chemical reactions that adhered to the electrode surfaces. This issue led to a rapid decline in the performance of the battery, rendering it of limited practical use.
ℹ️ The term "battery" was coined by Benjamin Franklin in 1749 to describe a set of linked capacitors he used for his experiments with electricity.
Subscribe- t.me/askmenow
What factors and mechanisms allow certain cells to keep working after an organismal death and why is it important to study the third state?
Postmortem conditions
🔳 Several factors influence whether certain cells and tissues can survive and function after an organism dies. These include environmental conditions, metabolic activity and preservation techniques.
🔳 Different cell types have varying survival times. For example, in humans, white blood cells die between 60 and 86 hours after organismal death. In mice, skeletal muscle cells can be regrown after 14 days postmortem, while fibroblast cells from sheep and goats can be cultured up to a month or so postmortem.
🔳 Metabolic activity plays an important role in whether cells can continue to survive and function. Active cells that require a continuous and substantial supply of energy to maintain their function are more difficult to culture than cells with lower energy requirements. Preservation techniques such as cryopreservation can allow tissue samples such as bone marrow to function similarly to that of living donor sources.
🔳 Inherent survival mechanisms also play a key role in whether cells and tissues live on. For example, researchers have observed a significant increase in the activity of stress-related genes and immune-related genes after organismal death, likely to compensate for the loss of homeostasis. Moreover, factors such as trauma, infection and the time elapsed since death significantly affect tissue and cell viability.
🔳 Factors such as age, health, sex and type of species further shape the postmortem landscape. This is seen in the challenge of culturing and transplanting metabolically active islet cells, which produce insulin in the pancreas, from donors to recipients. Researchers believe that autoimmune processes, high energy costs and the degradation of protective mechanisms could be the reason behind many islet transplant failures.
🔳 How the interplay of these variables allows certain cells to continue functioning after an organism dies remains unclear. One hypothesis is that specialized channels and pumps embedded in the outer membranes of cells serve as intricate electrical circuits. These channels and pumps generate electrical signals that allow cells to communicate with each other and execute specific functions such as growth and movement, shaping the structure of the organism they form.
🔳 The extent to which different types of cells can undergo transformation after death is also uncertain. Previous research has found that specific genes involved in stress, immunity and epigenetic regulation are activated after death in mice, zebrafish and people, suggesting widespread potential for transformation among diverse cell types.
Implications for biology and medicine
✔️ The third state not only offers new insights into the adaptability of cells. It also offers prospects for new treatments.
✔️ For example, anthrobots could be sourced from an individual’s living tissue to deliver drugs without triggering an unwanted immune response. Engineered anthrobots injected into the body could potentially dissolve arterial plaque in atherosclerosis patients and remove excess mucus in cystic fibrosis patients.
✔️ Importantly, these multicellular organisms have a finite life span, naturally degrading after four to six weeks. This “kill switch” prevents the growth of potentially invasive cells.
✔️ A better understanding of how some cells continue to function and metamorphose into multicellular entities some time after an organism’s demise holds promise for advancing personalized and preventive medicine.
ℹ️ Usually, scientists consider death to be the irreversible halt of functioning of an organism as a whole.
Subscribe- t.me/askmenow
Which planet in the solar system may once have had a ring like Saturn?
Surprisingly but it’s Earth that may have sported a Saturn-like ring system 466 million years ago, after it captured and wrecked a passing asteroid, a new study suggests.
The debris ring, which likely lasted tens of millions of years, may have led to global cooling and even contributed to the coldest period on Earth in the past 500 million years.
Using computer models of how our planet's tectonic plates moved in the past, scientists analyzed 21 crater sites around the world (across modern Australia, China, Europe, India, North America and Russia) that researchers suspect were all created by falling debris from a large asteroid between 488 million and 443 million years ago, an era in Earth's history known as the Ordovician during which our planet witnessed dramatically increased asteroid impacts.
ℹ️Saturn isn’t the only planet with rings. Jupiter, Neptune and Uranus have less obvious rings, too.
Subscribe- t.me/askmenow
Where do lavas originate from?
Lavas from hotspots likely originate from a worldwide, uniform reservoir in Earth's mantle, according to a new research.
The findings indicate Earth's mantle is far more chemically homogenous than scientists previously thought - and that lavas only acquire their unique chemical "flavours" enroute to the surface, interacting with different types of rocks.
Besides shedding entirely new light on hotspot lavas in oceanic parts of the world, the analysis also revealed an exciting new link to basaltic lavas on the continents. These melts, which contain diamond-bearing kimberlites, are fundamentally different from magmas found at oceanic hotspots. They nevertheless prove to have the same magma "ancestor."
ℹ️ A hotspot is a large plume of hot mantle material rising from deep within the Earth. A line of volcanoes develops as a plate moves over a hotspot, much as a line of melted wax forms as a sheet of waxed paper is moved slowly over a burning candle.
Subscribe- t.me/askmenow
What clouds are rare and form in unique ways?
Lenticular, or lee wave, clouds
▫️are lens-shaped and often look like flying saucers
▫️form downwind of an obstacle, e.g. a mountain, in the path of a strong air current
▫️seem to stay in one place, even though air is moving through the cloud, unlike other types of clouds.
Kelvin-Helmholtz clouds
▫️look like breaking waves in the ocean
▫️form when there is a difference in the wind speed or direction between two wind currents in the atmosphere and complex evaporation and condensation patterns create the capped tops and cloudless troughs of the waves.
Mammatus clouds
▫️are pouches of clouds that hang underneath the base of a cloud
▫️are most often associated with cumulonimbus clouds that produce very strong storms
▫️usually form during warm months, and are formed by descending air in the cloud.
▫️look like a field of tennis balls or melons, or like female human breasts ('mammatus' in Latin means ‘mamma’, or ‘breast’)
Subscribe- t.me/askmenow
What are the main characteristics of mid-level clouds?
Altocumulus clouds
▫️are mid-level, grayish-white with one part darker than the other
▫️usually form in groups and are about one kilometer thick
▫️are about as wide as your thumb when you hold up your hand at arm's length
▫️may be an indicator of a thunderstorm by late afternoon if seen on a warm, humid morning.
Altostratus clouds
▫️are mid-level, gray or blue-gray clouds
▫️usually cover the whole sky
▫️may be an indicator of a storm with continuous rain or snow.
The Sun or moon may shine through an altostratus cloud, but will appear watery or fuzzy. Occasionally, rain falls from an altostratus cloud. If the rain hits the ground, then the cloud has become a nimbostratus.
Nimbostratus clouds
▫️are dark gray, have ragged bases and sit low in the sky
▫️are associated with continuous rain or snow.
▫️sometimes cover the whole sky so that one can't see the edges of the cloud.
Subscribe- t.me/askmenow
When and by whom was the smiley emoticon invented?
🗓🙂 On September 19, 1982, Scott Fahlman, a computer science professor at Carnegie Mellon University, is believed to have invented the sideways smiley emoticon (“smiley face”), by combining a colon, a hyphen, and a close parenthesis – “:-)”
🖥 By the early 1980’s, the Computer Science community at Carnegie Mellon was making heavy use of online bulletin boards or “bboards” – a precursor of today’s newsgroups, a platform socially accessible to others on the university’s closed intranet.
🙂 As this platform was then limited to text only, Fahlman suggested punctuating humorously intended computer messages by posting the smiley emoticon.
☹️ Interestingly, in the same post, Falman also suggested the use of :-( to indicate that a message was meant to be taken seriously, though that symbol quickly evolved into a marker for displeasure, frustration, or anger.
ℹ️ The smiley face has been dubbed the “first internet emoticon”.
Subscribe- t.me/askmenow
What is the largest volcano in the solar system?
🔺 Mars' Olympus Mons is the largest volcano in the solar system.
🔺 Found in the Tharsis Montes region near the Martian equator, Olympus Mons is one of a dozen large volcanoes, many of which are ten to a hundred times taller than their terrestrial counterparts. Olympus Mons is the tallest of them all towers 25 km (16 mi.) above the surrounding plains and stretches across 601 km (374 mi.).
🔺 Olympus Mons is a shield volcano.
🔺 Olympus Mons rises three times higher than Earth's highest mountain, Mount Everest.
ℹ️ Since there's no surface water on Mars, it isn't as easy to quantify terrain heights there as it is on Earth. But scientists have defined an effective 'sea level' for Mars, known as the areoid, which is an imaginary sphere having the average equatorial radius of the planet. Relative to the areoid the mountain is only 21 km (13 mi.) high — but that's still a record-breaking size.
Subscribe- t.me/askmenow
What planet could have been responsible for the killing the dinosaurs?
*️⃣ Many mysteries remain about the Chicxulub impactor that wiped out more than 60 percent of known species, including the non-avian dinosaurs like Tyrannosaurus rex.
*️⃣ In a recent study, researchers used an innovative technique to demonstrate that the apocalyptic culprit had formed beyond Jupiter's orbit.
*️⃣ Scientists also suggest the Chicxulub impactor wasn’t a comet or a run-of-the-mill giant space rock—it was a conspicuously “carbonaceous” (C-type) asteroid, rich in carbon and organic compounds.
*️⃣ The conclusions are particularly notable, given how rarely this type of asteroid collides with Earth.
*️⃣ According to researchers, studying the nature of asteroids that have struck Earth since its beginnings:
📍 can help solve the enigma of the origin of our planet's water that may have been brought to Earth by asteroids;
📍 also allows humanity to prepare for the future.
Subscribe- t.me/askmenow
How to collect energy from raindrops?
💦 Raindrops falling from the sky can produce a small amount of energy that can be harvested and turned into electricity.
Researchers have recently proposed several different devices for harvesting such dispersed hydropower.
One of the last inventions is a superhydrophobic magnetoelectric generator (MSMEG) ⬆️.
It consists of 5️⃣ parts:
📍a superhydrophobic magnetic material-based film (SMMF)
📍a coil
📍a NdFeB magnet
📍an acrylic housing
📍an expandable polystyrene (EPS) base.
According to scientists, the MSMEG can quickly charge a commercial capacitor with 2.7 V/1 F to 1.18 V within 200 seconds and power diverse electronic devices, e.g. LEDs and fans.
The authors of this study believe that such an MSMEG may provide a promising strategy for efficiently harvesting dispersed raindrop energy.
However, there are also opinions that such technologies are difficult to develop on a large scale and have limited practical application.
Subscribe- t.me/askmenow
What is the minimum of light required for plants to grow?
🌿☀️ Plants can grow with much less light than previously thought, according to a new study.
✅ Researchers lowered light sensors into Arctic water to a depth of 50 metres (164 feet) to test how low light levels must become before plant life ceases to exist and found that tiny water-based organisms called microalgae were able to perform photosynthesis with very little light ⬆️.
✅ The microalgae carry out this process at the lowest light levels ever recorded – just 0.04 micromoles of photons.
✅ This isn’t very far from what computer simulations predict to be the lowest light possible in any circumstances – 0.01 micromoles of photons.
✅ Typical light conditions outside on a clear day are between 1,500-2,000 micromoles of photons – more than 37,000-50,000 times the amount of light required by those microalgae.
ℹ️ This research can potentially make it easier to grow plants in areas with little sunlight and even in space.
Subscribe- t.me/askmenow
What are some examples of the smallest 3D-printed items?
🛳 The smallest boat ever sailed is a 11.5-micrometer-long – 0.0004-inch, about one-third of the thickness of a human hair – and is 3D-printed ⬆️. This tiny ship, named for a popular 3D-printing test "3DBenchy", was made by a team at Leiden University, the Netherlands in 2020. The scientists created the boat in a bid to enrich their research on microswimmers, or small particles that move in liquid.
🪧 The smallest 3D-printed billboard is 1.424 square millimetres (0.002 square inches), and was made by Kao Commercial, in Shanghai, China, in December 2021 ⬆️.
🗺 Scientists have created an accurate 3D map of the Earth that is so small that one-thousand of them could fit on one grain of salt. Patterns of the Earth’s continents were created using an incredibly sharp silicon knife to carve features as small as 15 nanometres on a polymer substrate measuring only 22 by 11 micrometres ⬆️.
Subscribe- t.me/askmenow
When was 3D printing invented?
📌The 1980s were a dynamic period in the history of 3D printing.
📌In 1981, a Japanese inventor Dr. Hideo Kodama paved the way for 3D printing technologies. He laid the foundation for additive manufacturing and developed a system for creating three-dimensional objects through a layer-by-layer approach using photosensitive resins.
📌In 1984, a US inventor Charles (Chuck) Hull patented filed the first patent for 3D printing – the Stereolithography process, the first commercial 3D printing technology and introduced the concept of layer-by-layer fabrication, which is fundamental to modern 3D printers.
📌Before emerging in a laboratory, 3D printing was described in science fiction:
✍️in 1945, in his “Things Pass By” Murray Leinster’s envisaged a constructor that used “magnetronic plastics” for fabricating articles from scanned drawings
✍️in 1950, Raymond F. Jones introduced the idea of a “molecular spray” to create items in his “Tools of the Trade”.
Subscribe- t.me/askmenow
Is there a battery that can last for decades?
☢️🔋 A nuclear battery powered by radioactive decay can last for decades.
Researchers have wanted to use radioactive atoms to build exceptionally long-lasting and damage-resistant batteries since the 1900s. But all prototypes were not very efficient.
Chinese scientists have improved the efficiency of a nuclear battery design by a factor of 8000.
The researchers used americium that is usually considered to be nuclear waste and radiates energy in the form of alpha particles, which carry lots of energy but quickly lose it to their surroundings. They embedded americium into a polymer crystal that converted this energy into a sustained and stable green glow.
Although americium has a half-life of 7380 years, this micronuclear battery ⬆️ should run for several decades, because the components surrounding the sample will eventually be destroyed by the radiation.
The battery may be used for deep-sea exploration and space missions.
Subscribe- t.me/askmenow
What are the major advancements in battery development after Voltaic pile?
Daniel cell (1836): English chemist, John Daniel (1790-1845) solved the performance degradation of the Voltaic pile in 1836 with the discovery of a two-fluid battery, named a Daniel cell. The system, consisted of a glass jar with a zinc anode on top and a copper cathode at the bottom. A two-layered liquid of concentrated CuSO4 and dilute H2SO4 was used as the electrolyte. It was commercially exploited mostly for powering telegraphs until the late 19th century when the introduction of other novel designs overshadowed its prominence. Daniel cell was a non-rechargeable battery.
Lead–acid storage cell (1854): German physicist Wilhelm Josef Sinsteden (1803-1891) in 1854, brought to light the concept of rechargeable batteries by utilizing two lead sheets in a container of dilute H2SO4. Soon after, in 1859, French physicist, Gaston Planté (1834-1889) introduced the first rechargeable lead-acid battery that revolutionized the world. It consisted of a dual sheet of lead with a rubber strip between them as a separator, which was again rolled into a spiral and immersed in dilute H2SO4 electrolyte.
Leclanché cell (1866): In 1866, George Leclanché (1839-1882), a French physicist, introduced several significant innovations and deviations from the prevailing approach of that time. He developed a new type of battery that utilized MnO2 as one of the electrodes, marking the first use of an oxide for this purpose. Lead oxide was not incorporated into the design of lead-acid batteries until 1881. The telegraphic service of Belgium swiftly adopted this technology in 1867. Leclanché also introduced the use of NH4Cl solution as the electrolyte, which diverged from the prevailing practice of employing protonic acids.
Dry cell (1886): Carl Gassner (1855-1942), in 1886, replaced the liquid NH4Cl solution in the Leclanché cell with a paste of NH4Cl solution mixed with plaster of Paris, creating the first significant dry cell. Gassner's invention was patented in multiple countries. During the same period, there were also independent developments of dry batteries (e.g. by Wilhelm Hellesen and Yai Sakizo), so the precise attribution of who invented the first dry cell remains somewhat unclear.
Nickel–cadmium cell (1899): Swedish scientist Waldemar Jüngner (1869-1924) introduced the nickel–cadmium battery in 1899, which was the first alkaline battery. It quickly became renowned as the ideal battery technology for small consumer devices. This technology was praised for its high current capacity and the ability to undergo numerous charging-discharging cycles. However, it finally lost popularity due to its high cost, degradation of the electrolyte, reduced battery lifespan and the toxic nature of cadmium.
Nickel–iron cell (1901): In addition to his work on nickel-cadmium batteries, Jüngner also introduced nickel-iron batteries.
Nickel–metal hydride cells (1967): The unpopularity of cadmium encouraged the development of nickel−metal hydride batteries in 1967, which are not only cadmium-free but can store more charge than nickel-cadmium batteries. On the downside, nickel-metal hydride batteries deliver less power, have a faster self-discharge and are less tolerant to overcharge. They found wide applications in mobile phones, computers and portable electronic goods after their commercialization in 1991.
Lithium cells (1970): Lithium-based batteries were the last to emerge in the progression of battery technology, only introduced in the 1970s by various research groups. The concept of lithium-ion (Li–ion) batteries was initially discussed around 1979 after which significant advancements were made, starting in 1980.
Subscribe- t.me/askmenow
What is the “Baghdad Battery”?
🔋 Batteries are perhaps the most prevalent and oldest forms of energy storage technology in human history.
🔋 In 1938, Wilhelm Konig, a German archaeologist, unearthed earthenware jars of approximately the size of a human fist at Khujut Rabu, located near Bagdad, modern Iraq. These 2,200-year-old jars were comprised of an iron rod within a copper cylinder, sealed with an asphalt stopper.
🔋 It is speculated that these jars were utilized by the inhabitants of the Parthian civilization, which governed the region 2,000 years ago, as electrical batteries for electroplating gold onto silver.
🔋 According to researchers, this ancient battery could produce electric current of approximately two volts.
🔋 This assemblage has become known as the “Bagdad Battery”.
❗️ However, it is important to note that there is currently no concrete evidence supporting this speculation, and even the dating of these artifacts remains somewhat disputed.
Subscribe- t.me/askmenow
What life-forms can emerge after death?
In a new study, scientist expanded knowledge about so-called “third state” that lies beyond the traditional boundaries of life and death.
Researchers described how certain cells – when provided with nutrients, oxygen, bioelectricity or biochemical cues – have the capacity to transform into multicellular organisms with new functions after death.
It was found that:
📌 skin cells extracted from deceased frog embryos were able to adapt to the new conditions of a petri dish in a lab, spontaneously reorganizing into multicellular organisms called xenobots ⬆️
📌 solitary human lung cells can self-assemble into miniature multicellular organisms – anthrobots – that behave and are structured in new ways, being able not only able to navigate their surroundings but also repair both themselves and injured neuron cells placed nearby.
These findings challenge the idea that cells and organisms can evolve only in predetermined ways.
Subscribe- t.me/askmenow
How many “hidden turbulences” in Van Gogh's “Starry Night”?
The illusion of movement in “The Starry Night” is so vivid that scientists analyzed how closely van Gogh’s depiction mirrors the actual physics of atmospheric turbulence.
They discovered two “hidden turbulences”:
1️⃣the sizes of the 14 whirls or eddies and their relative distance and intensity, follow a physical law known as Kolmogorov’s theory of turbulence.
ℹ️In the 1940s, Soviet Russian mathematician Andrey Kolmogorov (1903-1987) described a mathematical relationship between the fluctuations in a flow’s speed and the rate at which its energy dissipates.
2️⃣the paint, at the smallest scale, mixes around with some background swirls and whirls in a fashion predicted by turbulence theory, following a statistical pattern known as Batchelor’s scaling.
ℹ️Batchelor’s scaling mathematically represents how small particles (drifting algae in the ocean or pieces of dust in the wind) are passively mixed around by turbulent flow.
Subscribe- t.me/askmenow
Why is morning wiser than evening?
People are easily seduced by first impressions, even when they turn out to be inaccurate.
At the same time, expressions like ‘morning is wiser than evening’ or ‘one should sleep on it’ exist in many cultures and languages.
According to a new study, sleeping on it can really help people avoid judging a book solely by its cover.
In “garage sale” experiments, the researchers asked participants to look through virtual boxes. All boxes were equally valuable, but rewards were either evenly distributed or clustered at the beginning, middle, or end of the sequence. A pattern (a psychological phenomenon called primacy bias) quickly emerged: when the participants had to make a decision right away, they tended to believe that some boxes were more valuable than they really were. However, participants who weren’t asked to decide until the next day were less likely to fall into these traps and made more rational choices.
Subscribe- t.me/askmenow
What are the main characteristics of low-level clouds?
Cumulus clouds
▫️have vertical growth
▫️are puffy white or light gray clouds looking like floating cotton balls
▫️have sharp outlines and a flat base at a height of 1000m
▫️are generally about 1km wide
▫️can be associated with fair or stormy weather.
Cumulonimbus clouds
▫️have vertical growth and can grow up to 10 km high, where they have an anvil-like shape because of high winds
▫️are thunderstorm clouds and are associated with heavy rain, snow, hail, lightning, and sometimes tornadoes.
Stratus clouds
▫️are low and have a uniform gray in color
▫️can cover most or all of the sky
▫️can look like a fog that doesn't reach the ground.
Light mist or drizzle is sometimes falling when stratus clouds are in the sky.
Stratocumulus clouds
▫️are low, lumpy, and gray
▫️can line up in rows and also spread out
▫️may be confused with higher altocumulus clouds.
Only light rain (usually drizzle) falls from stratocumulus clouds.
Subscribe- t.me/askmenow
What are the main characteristics of high-level clouds?
Cirrus clouds are
▫️made of ice crystals and look like long, thin, wispy white streamers high in the sky
▫️commonly known as "mare's tails" because they are shaped like the tail of a horse
▫️often seen during fair weather (but if they are followed by cirrostratus clouds, there may be a warm front on the way).
Cirrocumulus clouds are
▫️small rounded puffs that usually appear in long rows high in the sky
▫️usually white, but sometimes appear gray
▫️often called a "mackerel sky” as they can look like the scales of a fish when covering a lot of the sky
▫️common in winter indicating fair, but cold, weather.
Cirrostratus clouds are
▫️high, thin sheet-like thin clouds that usually cover the entire sky
▫️so thin that the Sun or moon can sometimes shine through and appear to have a halo as light hits the ice crystals and bends.
▫️usually seen 12 to 24 hours before a rain or snowstorm.
Subscribe- t.me/askmenow
How many types of clouds are there?
The global standard for cloud classification is the World Meteorological Organization's International Cloud Atlas, which lists 10 main types of clouds:
High-Level Clouds
☁️ Cirrus
☁️ Cirrocumulus
☁️ Cirrostratus
Mid-Level Clouds
☁️ Altocumulus
☁️ Altostratus
☁️ Nimbostratus
Low-Level Clouds
☁️ Cumulus
☁️ Cumulonimbus
☁️ Stratocumulus
☁️ Stratus
There are also other types of clouds that generally fall outside of this classification system:
☁️ lenticular clouds
☁️ mammatus clouds
☁️ contrails (condensation trails produced by airplanes).
In the polar regions, the top of the troposphere is lower, so clouds are lower. In the tropics, the top of the troposphere is higher, so clouds are higher.
Sometimes researchers mention the four main types of clouds, referring to the classification by industrial chemist Luke Howard (1772-1864) who named three main types — cirrus, cumulus, and stratus — with a fourth special type called nimbus.
Subscribe- t.me/askmenow
What makes a story successful?
There are not so much universal truths about humanity, but one thing is for certain: humans love stories.
Whether it's books, movies, TV shows or even advertisements, people are constantly being told or telling stories every day. Entire industries are built around storytelling and understanding which stories connect with people the most.
By applying advanced computational linguistics and trend detection analysis to 30,000 books, movies, TV shows, and even fundraising pitches, the researchers found one core element of storytelling that helped predict a story's success with audiences: narrative reversals.
Narrative reversals are defined as key turning points in a story or changes in fortune that take characters from heights to depths and vice versa.
According to scientists, narrative reversals are not the sole determiner of how good a story is, but they were impressed with its consistency and the fact that it's so simple.
Subscribe- t.me/askmenow
Where does love live?
❤️🧠 Love is often associated with the heart, but, according to scientists, love is more about the brain.
Using cutting-edge brain imaging technology, researchers characterized the brain areas involved in love for six different objects: romantic partner, one’s children, friends, strangers, pets, and nature.
Scientists induced feelings of love using short stories and found that depending on its object different types of love light up different parts of the brain ⬆️
Interestingly, the experts found that love for one’s children generated the most intense brain activity, closely followed by the romantic type.
Interactions with different entities, whether humans, animals, or nature, led to varying patterns of brain activation.
The findings extend beyond understanding emotional responses, offering potential applications in improving mental health and paving the way for more effective therapies that strengthen emotional well-being and personal relationships.
Subscribe- t.me/askmenow